How to mix turquoise color from paints. We get the turquoise color and its shades by mixing colors

Artists often use this tone to depict nature paintings. It is called the color of coolness, the morning sky and sea water. Since it is absent in ordinary palettes, we will tell you in detail how to get a turquoise color when mixing paints.

Proportions

This color is somewhere between green and blue. Moreover, the first tone is predominant. To get a classic turquoise, you need to mix the colors in the following proportions:

• cyan blue 100%;
• classic green 10%.

For highlighting, white paint is required. You can darken the final result using black color. If the resulting tone needs to be "cooled", a little gray is added. To obtain some shades, a little yellow or cream is added to turquoise. They should be no more than 1/6 of the total mass.

To see if you can achieve the desired color, take a brush and apply paint to paper or another surface. Keep in mind that watercolors and acrylics always lighten after drying, while oil paints, on the contrary, darken a little.

shades of turquoise

This tone, like any other, has many shades. They can vary from delicate light green with a slight blueness, pastel to rich bright:

• pale turquoise: obtained by adding 5% white;
• cyan: very close to blue, to achieve it, you need to take 100% blue and a small amount (10%) green;
• emerald-turquoise: there is a little more green in it; to get an emerald turquoise color, you must also add yellow and white;
• sea ​​wave: you need 100% green, 50% blue and a little (10%) white;
• robin eggs, a transitional between turquoise and mint, often called Tiffany's color, can be obtained by taking 2 parts blue and a little less (1 part) green.

Artists love to give this tone the most exotic names. There are colors of curacao, Florin springs, Atlantis, a waterfall, and even the color of thrush eggs. Experiment and you. Perhaps you can create a new, unusual shade.

What colors go with

It harmonizes with both cold and warm colors. In the classic version, it refers to cold. But you can also make the turquoise color warm if you add a little yellow to it.

Its lightest, pastel tone is undesirable to use in large quantities. This can give a feeling of sterility. It is not for nothing that in recent years, the clothes of medical workers have been replaced from white to him.

A classic pair is a combination of turquoise and white. After all, it looks very advantageous against a white background. You can soften turquoise and reduce the degree of coolness with milky beige.

Combining it with red is considered controversial. After all, they are both too sharp. For balance, white is usually added to this pair. Its combination with orange gives the same contrast. But it is better to combine this tone not with orange, but with yellow. The result is a cheerful, energizing set.

You can also combine turquoise with a related blue. To do this, it is better to choose the brightest tone of blue - ultramarine. An exotic, but rather original pair is turquoise and brown (chocolate). The result is more subdued, close to conservative.

So, we figured out what colors to mix to get the turquoise color and its shades. You can experiment and try to get a new tone by giving it any poetic name. Good luck!

Turquoise, which includes all shades of natural turquoise stone, is a mixture of green and blue. The shade of turquoise depends on the ratio of these colors: from sky blue (the color of curacao) to a clear green shade of the sea wave (aquamarine). This color is considered the coldest in the spectrum of colors, therefore it has a calming effect on a person. This result is used in the design of interiors in which you need to create a peaceful, relaxing atmosphere. The unimaginably beautiful color of precious turquoise looks great in clothes, perfectly harmonizing with natural skin tones.

You will need

• - blue paint;
• – green paint;
• - palette;
• - a brush or palette knife.

Instruction

1. To acquire a turquoise color, take blue and green paints. These must be pure shades of both colors, as close as possible to the examples on the standard color wheel. Unlike shades of blue, turquoise shades are not primitively lighter than blue - they are directly related to green.

2. Take some blue paint on the palette and start adding green to it little by little. Depending on what kind of shade - bluish or greenish - you intend to get, continue to mix these two colors until you achieve the desired result.

3. The range of shades of turquoise is quite huge: it can be both soft, muted, pastel, and brilliant, juicy colors. The brightness of the color is achieved by using pure undiluted paints that make up the color. In order to get pastel turquoise shades, add a little white to the color obtained on the palette. By varying their number, it is possible to obtain colors of varying degrees of brightness. To muffle the bright glow of turquoise is also possible by adding a small amount of gray paint. The color will get no less decent sound.

4. If you work with water-soluble paints such as watercolors or gouache, then you can also achieve a variety of shades by using turquoise diluted with water. Applying paint on white paper with a loose, transparent layer, it is possible to get more clear shades of turquoise.

5. From the nature around us - the most talented Artist - we can learn the harmonious combination of different colors. Turquoise color includes all shades of water. And the natural companion of water in nature is sand. Consequently, turquoise tones look more harmoniously than anyone with diverse shades of sand and earth - brick, clear coral, golden ocher, grayish sandy, coffee and many others.

Note!
Experts do not recommend using turquoise in the interior of a children's room. With its calming and relaxing effect, it can slow down the child's tendency to become.

It is located between green and blue.

It comes in many variations. It includes both soft and bright, intense colors. If you can’t find ready-made paint, you will have to mix green and blue yourself. As a result, we will get the desired shade. If you try to briefly answer the question of what colors to mix to get turquoise, it should be noted that you have to use cyan blue and less green. We will discuss in more detail in this article.

Color selection

So, we need, How to get it in practice, now we will describe in detail. First you need to decide on the desired shade. The word "turquoise" most often refers to a mixture of green and blue with a predominance of the first. However, we can achieve different shades.

It's easy to add a drop of light gray or white paint. As a result, we get a more delicate shade. You can also mix rich blue, green and yellow. As a result, we get a bright turquoise. It remains to choose between a bright or soft shade.

The basis

So, earlier we already managed to get the turquoise color. How to get it in other ways, we will consider further. We have already figured out that we will need blue and green paint. Their basis can be any water, oil, acrylic.

However, it should be remembered that the same type of paint mixes better. It is best to buy everything you need in one of the specialized stores for artists. In this case, you should study the entire range presented. It may be possible to find the desired shade in finished form.

Watercolor

How to get a turquoise color when mixing paints, we already know: we need yellow, green and However, it is better to take them in a small drop in order to achieve extreme accuracy when creating the required paint. If you are an aspiring artist, it is better to give preference to watercolor. This type of paint is easy to handle. Plus, they mix really well. Watercolors are usually sold in small tubes. For pale shades, yellow paint is suitable.

Water and space

If you're wondering how to get turquoise mixed together to be more muted, mix green and blue with white. Suppose the picture is a tropical beach, then we use a warm cream as the basis for transferring the image of sea water onto paper.

A purer white would be suitable for creating a picture of a distant cold turquoise planet. Let's use shades of blue, which is close to the green spectrum. You can try ultramarine, azure, cobalt, cyan or any other similar option. The main thing is that it should be closer to green than purple.

Any pigment in itself contains a small amount of other colors. Thus, paint of an arbitrary shade will mix well with another color. In practice, this is very convenient.

Saturated color

So, to solve the question of how to get a turquoise color when mixing paints, blue and are used. However, you can achieve an even better result. For this we will use blue paint containing green pigments. It is impossible to find a "pure" basis.

In particular, this applies to blue. In theory, it should give a good green with yellow, and a great purple with red. In practice, these lines are blurred. The fact is that blue always approaches red or green due to the imperfect chemical purity of each pigment.

To obtain an extremely saturated color, we take the necessary ingredients. We are talking about the already familiar to us blue and green shades.

1. We apply a small amount of cyan paint to the edge of the palette. In this case, it should be blue-green.
2. Let's move on to the next step. Place some green paint next to it. If not, you can get this color yourself. To do this, mix an equal amount of yellow and blue. Instead of a palette, any clean, dry surface will do. However, an item that is used in this way can no longer be used for anything else.
3. We mix blue and green in a ratio of 2: 1. The first pigment should be more. You can also experiment with proportions, but it is better to use the ratio given as a sample. A little more green paint will give a rich shade of sea wave. If we reduce the green content, we get a subtle turquoise. It will approach blue.

So we figured out what elements the turquoise color consists of. How to get it is detailed above.

Modern interior design is full of original shades. The range of finished products does not always contain the desired semitone. The color mixing table will help you get the desired result at home. The information is useful not only when renovating an apartment. Knowledge of mixing colors is useful to a wide range of people: novice painters, car repair workers, decorators and other creative people.

Blending experiments: what you need to know in advance

The world around us is filled with a wide color palette, but all the colorful splendor is based on three primary colors: blue, red and yellow. It is due to their mixing that the desired semitone is achieved.

To get a new shade, use base colors in various proportions. The simplest example of how to get green. The answer is extremely simple: mixing yellow dye with blue. An illustrative table of primary, secondary and transitional colors obtained by mixing is presented below:

This table will help you understand that the question of how to get yellow is in itself incorrect. It cannot be achieved by combining other components, since yellow belongs to the three main tones. Therefore, when a need arises for yellow, they acquire a ready-made dye or extract a pigment from natural products, which is not entirely advisable.

The same initial colors, taken in different proportions, when mixed, give a new result. The larger the volume of one dye, the final result after mixing will be closer to the original shade.

It is necessary to conduct experiments taking into account well-known rules. If you combine chromatic colors that are close to each other in the color wheel, after mixing, you get a paint with a pronounced chromatic tint, although not having a pure tone. The combination of dyes located in opposite directions leads to the formation of an achromatic tone, in which a gray tint predominates. The chromatic circle will help you navigate in the optimal combination of colors:

Attention! Mixing dyes does not always lead to a stable result. Some paints, when combined, provoke a chemical reaction, due to which the decorative coating subsequently cracks. There are cases when the desired background becomes gray or dark over time.

For example, if you take red cinnabar and white lead, the resulting bright pink color will darken after some time. It is advisable to take the most limited number of initial paints to obtain the desired tone. When mixing, their compatibility must be taken into account. For example, oil-based dyes are sensitive to solvents. Darkening or quickly fading materials are best excluded immediately. A table of combinations that should not be used will prevent mistakes in the creative process:

Variety of shades of red

Red is one of the three original colors that make up the base. Therefore, even a minimal set of colors cannot do without it. However, the question of how to get red when mixing paints sometimes still arises. This is due to the fact that magenta is involved in printing, so creative searches for how to get red are natural. Everything is solved extremely simply: to obtain natural red, yellow is mixed with magenta in volumes of 1: 1.

The color scheme of red is diverse, therefore there are many combination options:

Comment! A beautiful purple color cannot be obtained by combining violet with red. The only way to achieve a bright shade is to find a red paint without yellow impurities and mix it with blue.

The following circle demonstrates the variety of shades of red. It is worth noting that the addition of white colors to any mixture leads to a lightening of the tone, and black to a darkening.

The following table will help you understand the names of shades of red:

Variations in blue

An equally rich palette of shades gives mixing with blue dye, which is part of the basic triad. Therefore, its presence in any set is mandatory. However, even a set of 12 paints sometimes does not meet the need for a true blue tone. The reason is color variations. The classic tone is called royal, and on sale it is often replaced by ultramarine, which is characterized by a bright dark hue with a slight presence of purple. Therefore, the question of how to get the blue color no longer seems absurd. The way out of the situation is to add white to the base color in a ratio of 3: 1. Blue is obtained in the same way, only white is used more when combined.

An interesting color of blue with a moderately saturated result is obtained by combining a darkish ultramarine with turquoise.

• Equal volumes of blue and yellow dye will produce a dark blue-green tone. The introduction of white contributes to some lightening, but the brightness is reduced. The reason lies in the combination of three components, and the more of them, the more dull the color.
• To get a turquoise color, cyan blue is mixed and a slightly smaller amount of green is added. This shade is also called aquamarine.
• The color obtained from equal volumes of blue and light green is called Prussian blue. With the introduction of white, the saturation decreases, but the purity of the hue does not go away.
• Blue with red colors in a ratio of 2: 1 give blue with a hint of purple. The resulting color is lightened by the introduction of white.
• Mixing blue and pink magenta in equal parts will give royal blue, which is characterized by unusual brightness.
• Darken blue is obtained by mixing it with black in a ratio of 3:1.

An assistant in mixing experiments will be a table with the names of shades of blue:

Variety of green

The original green is usually presented in all sets; in the absence of the desired dye, there are no problems with obtaining. Combining yellow with blue gives the desired green background. But any direction of creativity, be it painting, interior design or another option for decorating objects, requires a wide palette of green. The basic principle of all experiments is to change the proportions of the base colors, white or black dye is used to lighten or darken the background.

• The combination of blue and yellow with a slight addition of brown represents khaki. Green with a small amount of yellow forms olive.
• Traditional light green - the result of mixing green with white. Adding yellow or blue will help regulate warmth.

  Attention! The quality of the original components affects the saturation of the green color. The more intense the base tones, the brighter the blending result will be.

• A yellow-green effect will be obtained by combining yellow with blue in a ratio of 2: 1. Reverse proportion will result in a blue-green tone.
• Dark green is achieved by adding half the black.
• A warm light green background is formed from a mixture of white, blue and yellow paint in a ratio of 2:1:1.

A variety of colors of green hue demonstrates a circle. The base dye is located in the center, then there is an additional component, after - the result of mixing. The last circle is the experiments of the resulting tone with the addition of white and black dye.

The next table will become an assistant during the experiments.

Other color combinations

The color kaleidoscope is not limited to the combination of basic dyes. For example, gray is often required. Different proportions of white and black pigment will give a wide achromatic palette.

How to get ivory? The base will be white, ocher and dark brown are gradually added to it in small portions. Ocher contributes to the manifestation of warm tones, an increase in brown leads to a cold background.

Another table shows many blending options:

How to get black color? By combining cyan, yellow and magenta. They are not always available, so three basic dyes will become an assistant. Combining green with red will also give some semblance of black, but it will not be pure.

Conclusion

Even if you didn’t find a description for which question, tables will be of help, which not only provide recommendations for mixing, but also clearly demonstrate the result of the experiments. The results of our own mixing experiments may differ slightly from those stated above, it all depends on the composition of the dye and the surface on which it is applied.

Turquoise color can be easily obtained by mixing paints. By definition, turquoise is a shade of blue and green, an aqua color close to cyan. There are a number of ways to get the turquoise color, they will depend on the result the artist wants.

Turquoise color in nature, its meaning

Turquoise is one of the most beautiful shades, it is widely distributed in the surrounding world. This tone can be seen on the sea near the resort shores, the water is colored turquoise in the area of ​​\u200b\u200bsea lagoons, various oases and water quarries. Different shades of turquoise are observed in the sky in the early hours of the morning. This color is not present in the main palette, it must be obtained by combining paints.

Psychologists call turquoise cold, mysterious, although people associate it with intimate conversations with friends. In the countries of the East, color symbolizes faith, healing, compassion, and in Europe it used to be considered a talisman that gives good luck.

Alternative medicine uses turquoise in color therapy: this shade is good for the eyes, can strengthen the immune system, reduces the risk of congestion, depression and stress. It is believed that this tone is very harmonious, designed to add calmness, balance to a person, helps to control emotions.

Getting a turquoise hue

It is not difficult to make a turquoise color with your own hands. To do this, you can use gouache, watercolor, acrylic paints, you just need to mix them in certain proportions. Since turquoise is a mixture of green with a drop of blue, these two basic tones will be required to prepare the paint.

There is no clear instruction on the number of colors. The search is a creative process where paint standards are selected individually. For work you need:

• white palette or plate;
• brushes;
• a glass of water;
• paper.

You should take a sufficient amount of greenery for work that does not have impurities, and then add blue dropwise. follows after the introduction of each new portion of the material. In any case, the amount of blue paint should be less than green. If a color seems appropriate, it should be tried out. To do this, make a smear on paper - a uniform turquoise tone should remain on it.

There are various shades of turquoise - sea wave, azure, blue-green, as well as exotic for the hearing of beginners curacao, aquamarine, the color of thrush eggs and others. It is worth considering the manufacturing process of the most popular turquoise halftones in more detail.

light turquoise

To create a lighter tone, you will need not blue, but blue paint. It is made by the simplest method - a little white is added to the desired degree of clarification. Then they begin to gradually introduce a blue tone into green, until a gentle turquoise hue begins to “loom”. Also, professionals often introduce a drop of yellow paint into the mixture - it gives brightness and lightness to greenery, makes it light green, so the finished turquoise will be airy, very beautiful. If the finished tone seems not tender enough, it can be diluted with any amount of white paint up to a pastel shade.

When light turquoise still needs to be “cooled”, a little gray paint can be added to the finished color scheme. That is, they mix green, blue, white and gray tones. The result is an unusual muted color, perfect for drawing pictures of the sky.

Dark turquoise

Dark tones of turquoise are also easy to make yourself. To do this, you should purchase cyan paint, which already has a green tinge with a blue tint (sold in an artist's store). You need to put a little of this paint on the palette, then add the usual green color scheme in small portions. A dark turquoise color is obtained by introducing a small amount of greens, while thorough mixing is very important. Some experts add a little brown to darken the tone even more, this color will be a little warmer than regular turquoise.

Aquamarine

Marine color is obtained in a similar way. It will require two standard colors - blue and green - in approximately equal proportions. They are mixed until smooth, then a tiny amount of white paint is introduced for some clarification. Depending on the amount of white, the color of the sea wave will change from saturated to paler. For professionals, a mixture of blue phthalocyanine and titanium dioxide is called sea color, but for the layman, ordinary (classic) gouache from the store is quite suitable.

Color ratio table for turquoise

Turquoise cannot be seen in the spectrum of primary colors, there are only basic tones. But by mechanical mixing of paints, almost any desired color can be made. Here is a table with data that will help you navigate the variety of shades of turquoise:

Even a schoolboy can make the shade in question. Experiments will help to create an original color - for this you need only paints, brushes, a palette and a little imagination!