How to make a title page for a project. How to make a title page

Title page, title page - the first page of the academic work, reveals the student's data and the topic. It is used for abstract, term paper, diploma work, report, . It contains information on:

• Full name of the student
• Speciality
• educational institution
• Work theme
• Kind of work
• Year of completion
• Data of the verifier

The design of the title page in accordance with GOST is regulated by the standard 2.105-95. It was adopted in 1995 and to this day is the main standard for how to issue the title page of an abstract and other works (term papers, diplomas, control papers). This GOST is valid in all CIS countries, including:

• Russia
• Belarus
• Ukraine
• Kazakhstan

Download title page samples.

Title page margins:

• left margin: 30 mm;
• right margin: 10 mm;
• top margin: 20 mm;
• bottom margin: 20 mm.

What font should be in the title page.

The guest specifies font size 14 for all fields, except for the title and title of the work. Usually Times New Roman or another sans-serif font. All data except student information is centered.

Instruction - 6 steps for the correct design of the title page in accordance with GOST.

Depending on whether you are making a title page for a control, term paper, diploma or essay, the completeness of the information will be different. But there are a number of mandatory data that are indicated for each work. The title page header contains the name of the ministry and educational institution.

Step 1. Ministry of Education

Specify the Ministry of Education of your country (14 font, capital letters)

Step 2. Univer.

Following is the full name and form of ownership of the educational institution (14 font, capital letters)

Step 3. Chair.

After that, we indicate the department (14 font)

Step 4. Type of work.

After that, depending on the type of work, in capital letters (16 font, bold Bold):

• • GRADUATE WORK
  • COURSE WORK
  • TEST
  • ABSTRACT

Step 5. The theme of the work.

Full topic name, classic spelling 16 font, bold, lower case

Step 6. Data of the executor and verifier

The data of the executor and the reviewer for different works are formatted differently, but always have 14 font size and are written in lower case. Here are some examples ○ Diploma Template

○ Template for term paper

○ Test Sample

○ Abstract template

Can they reduce the score for incorrect design of the title

The design of the title page is an important point on any subject and is part of the normative control. If the teacher accepted the work, in which the title page is incorrectly designed, he does not have the right to reduce the score for this, because. in this case, the work was checked and approved by the reviewer.

Which universities are suitable for

These rules are GOST. Therefore, they are universal and suitable for any university in Russia, Ukraine and other CIS countries. If you fundamentally do not want to redo it when the teacher requires it, you can refer to GOST 2.105-95. in which it is clearly spelled out for whom and how it operates.

Is the design different for different items?

The template for the design of the title does not depend on the subject. All its elements can remain the same and only the name of the item can change. The exception is test papers, which in some subjects may require a title page for a notebook. This is the usual A4 sheet format folded in half. We have a separate material where you can download this sample or design it yourself.

Is the design different for specialties?

Specialty doesn't matter at all. All elements remain unchanged, except for the specialty, which needs to be changed for the current one.

When a student prepares a term paper for delivery, one of the most pressing problems that he may encounter is the design of the title page, which, in most cases, is due to ignorance of general educational GOST, which establishes the basic requirements for the appearance and content of the title page. Another equally important reason is the inability to use text editor tools - MS Word.

Therefore, today I will give a number of tips on how to draw up a title page, I will try to highlight the main mistakes that students make and attach several samples that are relevant in 2017-2018.

Registration of the title page of the term paper in accordance with GOST

First of all, I want to briefly explain why it is required to adhere to any requirements and standards when designing student projects.

A student is a future specialist who will work with drawings, estimates, contracts, acts, regulations and other types of documentation.

Each of these documents has its own state-approved form. In order to educate the future specialist in the ability to properly interact with standardized documents, each alma mater teaches cadets to arrange their study papers in accordance with an established set of requirements. Due to this, a graduate, trained by term papers and semester papers, reports, etc., getting into a real working environment, can already independently process documents, form and correct them. Perhaps this is the main reason for the use of GOST by students of modern universities and colleges.

I got off topic, so I'll continue.

The need to design the title page in accordance with GOST is due to the fact that since the title page is the “cover” of the document, this is exactly the element that the supervisor, the examination committee sees first of all, and which creates the first impression of this scientific work. Imagine that you are given a term paper in your hands, the first sheet of which is unclear how it is designed (for a better understanding, look at the figure below).

Figure 1 - An example of incorrect design of the title page of the course paper

What do you see here? Different font, no clear highlighting of the main elements (header, author's name, theme) and other problems, right? Now think, would you accept such a document from your student? So the majority of teachers, having seen only one title, "wrap" the student, even if he has prepared an ideal paper as a whole. Therefore, my advice to you is to always adhere to GOST and do not ignore its requirements.

Where can I get the requirements for the title page

You can always take all the requirements that may be required when completing a course project from your teacher, usually all manuals are provided to them immediately before issuing an individual assignment for a course work. In the event that your scientific instructor did not do this himself, ask him - he must give. Well, if he doesn't have it either, then go to the pulpit.

In the received methodological manual, you will find not only a set of requirements for the design of the title page of the term paper, but you can also find a sample that can be used by copying it into your project. If you copy, do not forget to correct it in accordance with your data.

From my experience, I will offer you my set of requirements, which I use to design title pages, but whether you use them in your practice is up to you.

• To be included in the general numbering is mandatory. But in no case should you put a number on it.
• We center the header on the sheet, in it we indicate the name of your educational institution and the name of the department;
• The title of the work is written in capital letters, highlighted in bold, centered on the page (horizontally and vertically);
• After the title, indicate your name, group number, as well as data about your leader, indicating his position;
• At the bottom of the page, indicate your city and year of work;
• Do not use spaces and tabs to highlight structural elements - use MS Word tools to align text;
• If you want to create a frame, use headers and footers and divide the entire document into separate sections so that the frame does not go to the next pages of the work;
• Always use Times New Roman unless otherwise stated in the manual.

To consolidate the acquired knowledge, then I will tell you how to use them in practice.

How to make a title page in Word 2010 and 2007

To prepare the main sheet of your document in MS Word 2007, 2010 and later, let's create a new document (I hope you know how to do this). Now we fill in the empty document with the information that you want to reflect here. To begin with, you can fill the document with information without any formatting, we will do it later.

So, you should end up with something like this:

Figure 2 - An example of a title page without formatting

Happened? - Well done! Let's continue. Format the header of the document - select the text and select " Center text alignment» on the panel « Paragraph", we get the following result:

Figure 3 - An example of the design of the header header

Now let's move on to the title of the work - center it in the middle of the sheet and move it down by pressing the button " Enter", then open the font control panel and adjust the settings, we get:

Figure 4 - An example of the design of the name

Figure 5 - An example of a properly designed title page

How to make a title page frame in Word

I often hear this question from students. To begin with, I want to clarify that there are several types of frames for title pages - these can be guest frames for making entries in them, or they can be ordinary bounding lines. The first option is done using headers and footers, but I don’t recommend doing them yourself - this is a rather lengthy process and can negatively affect the structure of the entire document, so it’s better to download it:

The second option is much simpler and is done using the MS Word tool - " Borders and shading" which is located on the toolbar " Paragraph". The following window will open:

Figure 6 - Borders and shading

Now in this window you need to open the tab " Page» indicate the places where the borders of the frame will be placed on the title page - top, bottom, right, left. Also, if necessary, here you can set the thickness and texture of the frame. After press " OK”, as a result, the title of the document will be framed in a regular frame:

Figure 7 - Sample title page in a frame

Where can I find a template for the title page of a term paper

The above sample of the design of the title page is rather a generalized version and it is not always suitable for practical use, since in some cases the requirements of the manual establish other design rules. In my practice, I have seen more than 20 ways to design a title page only for course projects, and how many more can be found for abstracts, diplomas and other student reporting documents. Different examples of title covers differ in frames, fonts used, location and presence of certain structural elements, etc.

Finding ready-made title page templates is not as difficult as it seems. Many manuals already include a sample title page in the appendix, others include a link to a place to get a sample. You can also get it from a scientific instructor, at the department, download it on the Internet, take it from a manual on another subject, ask a friend, find it in last year's papers, etc. Several samples can be downloaded from the links below:

And finally. The last tip is to make the title last and better in a separate document so that the features of its formatting do not accidentally overlap with the design of the main content of the term paper.

That's all, good luck with your studies!

The first page of the document has its own unique design that each student must adhere to. After all, the title of the abstract is the face of all the work done and it creates the first impression (negative or positive) of the inspector. If the first page is framed incorrectly, then the reviewer, without even reading the text, will send the document for revision.

The title page of the abstract is drawn up according to two main state standards:

1. GOST 7.32-2001 - “Research report”. This applies to research work, which is the abstract. In this section of the section, all the necessary requirements are well described and students must adhere to them when they make out the main page of the work. That is, what exactly should be on the title.
2. GOST 2.105-95 - as a rule, they say ESKD, but the document is called in full: "Unified system for design documentation." This state standard is valid not only in Russia, but also in Belarus, Kazakhstan, Ukraine. Here are the general requirements for any text documents. That is, the student will read what the format of the title page should be, how to write the name of the university, the data of the student and teacher, etc.

Teachers of some universities are not guided by GOSTs, but create guidelines based on GOSTs, which spell out the requirements for the entire abstract, including the first page of the abstract.

Still, according to GOSTs, it is easier to draw up documents, because even if students did something wrong according to the training manual, the teacher will not be able to object, since the student adhered to state standards.

Title page rules

Despite the fact that university teachers create manuals with their own requirements, there are certain rules that must be followed in any case. Before creating the title page of the abstract, you need to set the margins: right - at least 1.5 cm, left - 3 cm, and top and bottom 2 cm, respectively.

However, it is better to learn these nuances at the department, as the teacher can change the requirements and deviate from state standards.

The title page of the main page of the document for each student should contain the following data:

• Country name (not always);
• full or abbreviated name of the department. This should be discussed with the reviewer;
• name of the discipline;
• the subject of scientific work;
• student data (the author who wrote the work). All data must be indicated in full, that is, full name, course or group number;
• author's form of education. A student can study full-time, part-time or evening;
• reviewer's data, that is, position (mandatory) and full surname, name, patronymic;
• the city where the student is studying;
• year of issue of the document.

It should also be remembered that the abstract should be numbered from the first page, but the page number is not affixed on the title page.

It is worth noting that not a single GOST regulates the font, that is, the type and size are not indicated. As a rule, teachers themselves say what font to use, usually Times New Roman, size 14. Therefore, before starting to write a work, you need to consult your reviewer about this, who will accept the work.

The procedure for preparing the title page of the abstract

Do not know how to arrange the title page of the abstract? If the teacher did not indicate his requirements, then the student can independently draw up a document in accordance with GOST.

To begin with, you can conditionally divide an A4 sheet into 4 parts. This is the top, center, right and bottom, and in each of them adhere to certain requirements.

In the first upper part in capital letters in the center is written: MINISTRY OF EDUCATION AND SCIENCE OF THE RUSSIAN FEDERATION. On the next line, the name of the university is written and below the name of the department in quotation marks. We present an example for clarity:

The second part is located in the center of the A4 sheet. Here the word is written only in capital letters: "SUMMARY", and after it the subject and topic of the scientific work are indicated. For example:

The third block must be right-aligned, where the data of the students (group, full name) and the inspector (position and full name) are written. The position of the teacher must be indicated:

And the last, fourth block, although small, is no less important. It is drawn at the very bottom of the page and must be centered. It indicates the city in which the university is located and the year the scientific work was published. It is worth remembering: if the abstract is submitted at the end of December, then you need to indicate the next year. The example shows that only the name of the city and the year are written. It is very important to note that the dot is not placed anywhere.

Of course, title pages often differ from each other. It all depends on the particular university and its requirements. Some teachers ask that the design of the title page of the abstract comply with all GOST standards, while others want to see a work written exclusively according to the training manual.

The title page of the abstract is issued quickly and easily if the student knows all the necessary rules. Here the requirements are minimal, but it is very important to correctly indicate the data not only of the university or department, but also of the teacher.

The article examined how to correctly issue the title page of the abstract in accordance with all GOST standards. When writing a paper, it is very important to consider the design of the first page. However, do not forget that universities often deviate at least a little from GOST, so it’s better to consult with your reviewer, and then start writing an abstract.

How to arrange the title page of the abstract correctly? updated: February 15, 2019 by: Scientific Articles.Ru

When opening a file for the first time in a Microsoft Word text editor, absolutely any user's attention is focused on the title page. A beautiful start - a presentable cover - is an impetus to action, a desire to familiarize yourself with the content. Sometimes a well-designed title page will say much more than the text below it. The multifunctional Word application, which is one of the best products of Microsoft, is able to provide the user with several very attractive modern "titles" "embedded" in the program's capabilities. Using ready-made layouts, the user only needs to fill in the empty columns. In the article below, we will consider a method that helps to insert into a document not only a standard title page, but also create a unique first page design.

Using ready-made "titles"

To make a title page in Word, the user, among other commands of the main menu, must find a subsection responsible for inserting various elements. After switching to the "Insert" command, you should click on the "Pages" subsection, which contains a link that opens "Cover Sheets". As a result, several possible options will appear on the screen, which are templates. After the user decides on the best option, you can confirm your decision by clicking on the layout with the mouse button.

It is important to know that you can insert a title page not only at the beginning of the document. At first glance, the ability to create a "title" in any place that only pleases the user may seem like a very dubious action. However, as practice shows, this kind of manipulation perfectly complements huge documents that have many separate chapters or sections. If necessary, the user can make his own title page for each of them.

Creating an original cover in a text editor Word

Although it takes only a few seconds to insert a standard template into Word that complements the document as a presentable cover, simple layouts created by application developers may not always meet the requirements of a potential user. The user can, using a huge toolkit of the software product, create his own unique "title book".

To do this, you need only a few minutes of free time. Initially, you need to use a combination of function buttons, Ctrl + N will allow you to create a new document. Next, you will have to decide on a more acceptable color scheme and drawings (pictures), if they are in the cover. If desired, the title page can be made white. The decision to paint the background with a certain color is made by adding a color. To do this, you need to place the autoshapes you like on a clean sheet and fill them with the desired color.

The next step helps to place several text blocks on the cover, all this together will create a ready-made base, which can later be inserted into any part of the document and filled with suitable words. To do this, the software product is equipped with "express blocks" located in the main menu of the program in the "Insert" category (section "Text"). After clicking on the command, a wide variety of blocks will appear on the screen; ready-made software solutions can be inserted anywhere in the template being created. Among other elements, most users of the Word editor have "Date", "Subject" and "Summary" on their covers.

After successfully inserting all the necessary text blocks, the user can change the color, size and font in the same way as when working with plain text. The color of the letters is also important, since when creating a dark background, black characters by default will simply be lost.

On this, the work on creating a unique title page can be considered completed, now you just need to save the template page. By the way, the new "title" will be located in the same place as the standard layouts. You can find it by browsing to the end of all software cover options. To save, you need to select everything that contains the cover page, then in the "Insert" category go to the "Pages" section, open "Cover Pages" and select the "Save selection to cover page collection" item in the list of actions presented.

It happens that a student brings to the teacher a wonderful, deep, excellent essay that reveals the topic, and the teacher wraps up the work due to improper design. It is especially disappointing to receive such a surprise just before the test or exam, which is not allowed without a credited abstract. So the design of the abstract is not a trifle.

However, there is nothing complicated in the rules for preparing an abstract. Problems usually arise with first-year students who simply don’t yet know how to write an essay correctly (because they were too lazy to find out before passing). But this article will help those who did not take a training manual at the department and thought about designing the night before submitting their work - agree, a common situation!

Sometimes fawn with the correct design of the abstract happens to newcomers-studlancers. Deciding to earn some money, a novice student believes that it is enough just to write a paper, and is very upset when the customer demands improvements with a scandal: the design is not according to the standard. So, this article, it seems to us, will also be useful for studlancers.

General rules for the preparation of abstracts

There are several types of abstracts, but in this case we mean the format of the academic work. This is a work that can be called a reduced, simpler version of the term paper. Therefore, the educational essay is drawn up in general in the same way as term papers and diplomas.

In many universities, and even more so in schools, they approach the design of abstracts less strictly, allowing small deviations from the strict GOST standard. Some faculties have their own rules regarding the design of papers, especially title pages (so, in addition to studying the general rules described below, we recommend that you still take a training manual at the department; sometimes special requirements are invented by teachers precisely in order to check whether you have read this method or not?).

But in general, it is enough to follow the basic rules regarding font selection, footnotes, numbering, content design, bibliography, title page.

It is best if you study the rules for preparing an abstract in accordance with GOST, which correspond to the standards for preparing more serious research papers. Even if the teacher is not picky, these skills will not be superfluous. And if you come across a "bureaucrat" from ours, then the design of the abstract in accordance with GOST will be more important than the content!

How to write an abstract?

1. Use Times New Roman font. This is not spelled out in GOST, but the practice is already established.

1. Size 14 is traditionally used, sometimes 12. This point is best clarified with the teacher. As a rule, the 14th is chosen for academic papers, but if the volume of the abstract is large, it makes sense to choose a slightly smaller font size. But the larger one is impossible, since the teacher will immediately understand that you are visually inflating the volume.

1. The line spacing is one and a half. A longer interval, again, indicates an attempt to cheat with volume.

1. Sheet orientation is portrait. Landscape is sometimes allowed when designing applications (for example, wide tables).

1. Margins: 1.5 cm for the top, 3 cm for the bottom, 1.5 cm for the right and 2.5 cm for the left (1 cm is a margin for filing sheets). Increasing the margins is sometimes used by students to increase the number of sheets, but this practice can lead to trouble, especially if you are completely insolent and set 3 - 3 - 3 - 4 in the settings.

1. Sheets form A4, density - standard for printing by a printer, white color.

1. Text is printed on one side of the paper only. The reverse must remain clean. By the way, a common mistake among beginners, who often write on both sides, as in a notebook.

1. Numbering (in Arabic numerals) is put down from the third sheet (from the introduction). The 1st and 2nd sheets (title and content), according to GOST, are not numbered, but are taken into account in the calculation. Simply put, there are no numbers on the first two sheets at the bottom, on the sheet with the introduction - “3” is already put. Applications are not numbered.

1. The title page consists of the following parts:

- A cap with the full name of the educational institution (university, college, school, etc.), the name of the faculty and department, as well as the phrase "Ministry of Education and Science of the Russian Federation" (it is sometimes excluded when making the title page of the abstract). Formatting is centered.

- The inscription "SUMMARY" with the title of the work and an indication of the discipline. Center formatting. Sometimes the name is indicated simply, without quotes, sometimes it fits into the formula ... on the topic "N" ...(the same with an indication of the discipline; check the specific requirements at the department). Formatting in the center, the location is approximately in the middle of the sheet (or slightly higher).

- Information about the author (name, course, sometimes a group or department) and supervisor (name, position, scientific degree - either in the format "D. H. N.", "C. M. N.", or expanded, specify in the manual). This block is located 7 - 9 intervals below the previous one. Please note that the block is located on the right, but the first letters of the lines are lined up - this arrangement can be achieved using the Tab key.

- The final block with information about the city in which the educational institution is located and the year the work was written. It is located at the very bottom of the sheet, formatting is centered.

The main size in the design of the title page is 14, but the word "SUMMARY" and the title of the topic are usually typed larger.

A sample of the title page for the abstract:

1. The content is located on the 2nd sheet and includes the names of all parts (introduction, chapters and paragraphs of the main part, conclusion, list of references (sometimes with a list of sources), applications).

For each of the elements, except for applications, a page number is indicated. Applications are not numbered, as they can be not only sheets, but also folders with materials, disks, etc.

At the top of the sheet is written: "CONTENTS" (without quotes, upper case). The following is information about the elements of working with formatting on the left, but the pages are indicated opposite, with formatting on the left (use the TAB key).

Content template:

1. The introduction starts. As a rule, all educational essays contain this part, similar to coursework and diplomas.

1. The main part of the abstract is divided (with rare exceptions) into chapters. Sometimes paragraphs (or paragraphs) are highlighted within chapters.

1. Chapters start on a new page. Sometimes paragraphs also begin with a new sheet (specify this point in the training manual).

An unspoken rule: the final part of the chapter should occupy at least a quarter of the page. For cunning students who inflate the volume, the ends of the chapters “hang” with a few lines on an almost blank sheet, which causes great irritation among teachers: they feel that they are, how to put it… considered fools.

1. The conclusion also begins on a separate sheet.

1. The headings of the structural elements of the abstract (introduction, conclusion, list of references, titles of chapters) are drawn up in a uniform way. Formatting is centered. Usually in upper case. Additional use of bold (bold) is possible.

It is not allowed to design the name of one element in upper case, the other in lower case.

Exception: Paragraphs and paragraphs, if they do not begin on separate sheets, may be in lower case and bold when the chapter titles are in upper case. In this case, they are considered an integral part of the chapters. This nuance is better to clarify with the teacher.

1. The titles of chapters, paragraphs, paragraphs and other elements of the work are written WITHOUT quotation marks.

1. Attention! After the titles of the chapters, the words "Introduction", "Conclusion", "Appendix" and the phrase "References" THE POINT DOES NOT PUT! DO NOT PUT!!! DO NOT PUT!!! A very common mistake. Drives teachers into hysterics

1. The list of references is drawn up on a separate sheet. In the abstracts, the number of materials used is small, so the groups in the list of references, as a rule, are not distinguished (however, this depends on the requirements of the department and supervisor). But if there are sources in the list of references, and not just scientific research, the selection of groups is necessary. This is true for historians, lawyers, philosophers and several other specialties.

1. The bibliography is arranged alphabetically. Works in foreign languages, if any, academic papers usually follow after Russian-language ones.

1. Registration of the list of used literature - according to GOST, that is, according to the rules for the bibliographic design of sources.

Two design options are allowed: with a dash between the areas of the bibliographic description and without it. The number of pages in a job may be omitted.

Sample bibliography:

Ivanov I. I. Intergalactic hyperdrives. - M.: Polytech, 2010. - 421 p.

Ivanov I. I. Intergalactic hyperdrives. Moscow: Polytech, 2010.

Attention: initials are separated from each other not only by dots, but also by spaces.

1. Links are an optional requirement. Some essays (for example, school ones) are written without links. If links are needed, they are made according to standard rules. Usually - on a separate sheet, after the list of references. Sometimes - page by page (in this case, continuous numbering of links is recommended). How to arrange links - at the end of the work or page by page, check with the teacher.

Ivanov I. I. Intergalactic hyperdrives. M.: Polytech, 2010. S. 35 - 37.

If you cite the same source twice or more, the following formula is used:

Ivanov I. I. Decree. op. pp. 35 - 37.

If you refer to this source twice or several times in a row, it is written simply:

1. The application is shutting down. Its pages are not numbered. If there are several applications, they are numbered in Latin numerals: I, II, III, etc.

1. Sheets of the finished abstract are fastened with a spiral or punched through with a hole punch and put into a folder with a transparent top sheet.