The Internet is not connected on the computer from the phone. Internet via mobile phone - All options

⁰

All acoustic systems can be divided into two main groups: active and passive. Each of the groups implies its own way of connecting to a computer. Active speakers have their own amplifier and direct speaker system. As you know, the output signal of a computer has a voltage calculated in units of volts, so such a signal must be amplified by an external amplifier. Such an external amplifier is contained in active acoustic systems. Passive speakers, on the other hand, have only the speakers themselves. In this case, you need to purchase an acoustic signal amplifier separately. Thus, it is the active speaker system that is most suitable for connecting to a personal computer.

Types of connectors

Depending on which speaker system is used, there are various options for using the connectors for connection. MiniJACK connectors are the most suitable in this situation. If your speaker system only has two speakers, then it has a single miniJACK output plug. Such speakers can be connected both to the system unit and to the laptop. If the number of speakers in your system is six, including a subwoofer, then the output of such a system should have three plugs for connecting each of the channels. Such an acoustic system cannot be connected to a laptop and to some types of system units that have only two audio input connectors without a special external sound card. Most personal computers have all three miniJACK input ports for connecting a 5.1 system. It often turns out that a sound system consisting of two speakers has two “bells” type plugs at the output. This connector is not suitable for connecting to a computer. In such a situation, you need to purchase an adapter from this connector to the miniJACK stereo connector.

Connection procedure

So, if you have a 2.1 sound system, the output connector of which is a standard miniJACK, then insert this plug into the corresponding connector on the system unit or marked with a headphone image. If your speaker system has a three-element input, then you need to connect it based on the color of each of the connectors. The orange plug must be inserted into the pink port of the system unit, signed with a microphone image. Insert the black plug into the socket located in the middle. Connect the green connector to the remaining space.

Within this article, the steps of using a mobile communicator as a modem are considered in order to connect a computer or laptop with Windows OS to the Network. Also paid attention to the question of how to set up the Internet on a Chinese phone.

What you need to have to connect

Requires a mobile phone with a built-in 3G, EDGE or GPRS modem. Any model of a Samsung, Nokia, Sony or other brand communicator may also be suitable. You need a USB cable to connect your phone to a computer. The wire can be replaced with a Bluetooth device. It is clear that in this embodiment, the computer and phone must have the appropriate adapters. You must have a modem driver or a program to synchronize with your communicator. The software is most often delivered on a disk at the same time as the phone, and there is also an opportunity for free download of everything you need on the manufacturer's website. Requires a SIM card from a valid mobile operator with a positive account balance. It is necessary that the data service is active for the SIM card. This can be found out from the operator, and when the possibility is not available, make a request to connect it. It is also necessary to determine the tariff plan and set up unlimited Internet on the phone. You should find out in the service center or on the website of the mobile operator how to make initialization and dial number for the communicator. They will need to be noted in the modem settings, as well as during the creation of the connection. The choice of service provider needs to be given especially more attention, because the quality and speed of the Internet connection for different providers can vary significantly. These parameters also depend on the region of residence and time of day.

How to connect

Setting up a connection when you need Internet on your phone through a computer is carried out in several stages. Install the driver and connect the phone to a PC or laptop. First of all, you need to install a synchronization program on your computer, and then connect your phone to it using a cord or via Bluetooth. When there is no connection application, but you need Internet on your phone through a computer, and there is only a folder containing driver files, you first need to connect the communicator to the PC. When the system starts installing new hardware, mark the path to this directory inside the required box.

Carrying out setup

Open access to the device manager of the operating system. In the "Modems" section, find the model of your phone, click the "Properties" item. In the new window, go to the tab with additional communication parameters and in the column with the commands, make an initialization string. Then press the consent button. As mentioned earlier, all the necessary data, if you need Internet on your phone through a computer, you need to find out at the service center. Of course, the initialization string will determine which service can be used. As a rule, each tariff plan has its own parameter.

How to create a connection

The procedure for accessing the Internet on your phone through a computer at this stage depends on the version of Windows. In the "Start" menu, go along the path: "Control Panel", then "Network and Internet Connections". In the next step, double-click on the Wizard icon. In the first window, click Next. In the "Type of network connection" check the box "To the Internet". Click "Next". In the next step, select "Manual connection settings". Next, consider the procedure for setting up the Internet on a Chinese communicator. We will describe the necessary actions using the example of the MegaFon network and a copy of the iPhone smartphone from China. The setup procedure is typical for all major telecom operators. You need to order automatic settings by a special number, and then save them. Thus, it does not matter which manufacturer's phone you use. If you are a MegaFon subscriber, you can always call the customer service at 0500 in order to get the settings for the communicator. Provide the operator with the required data. As a result of the conversation, you will receive a message on your phone with the necessary settings.

Internet via a mobile phone or smartphone that supports 2G and/or 3G communication technology can be configured on the user's computer.

Let's consider all available ways of such adjustment.

Connect a PC to the Internet via a smartphone (Wi-Fi hotspot)

If you use your PC and you urgently need access to the Internet, and there is no cable or router at hand, you can set up your smartphone as an access point.

It will work like a router and you can connect to it from your computer.

Follow the instructions below to connect your laptop or PC to your smartphone with mobile internet:

Turn on the wireless network in your computer settings;

Now go to the settings of your smartphone or your tablet;
Select the wireless menu and then access point. In earlier versions of Android, click on the item "Modem and router mode";
In the window that opens, click on router settings;

In the window that opens, come up with a name for the access point (any) and a password (at least 8 characters). Click save and then move the slider that turns on the hotspot;
Now, from the PC, connect to the mobile router in the same way as you would to any other wifi router.

Connecting a smartphone to a computer as a modem

To connect, you must have a USB cable (to connect your smartphone to a PC).

Follow instructions:

Immediately after connecting the smartphone, a dialog box appears on its screen asking you to select the connection mode. Ignore this window and close it;
Go to the main menu of the device and then go to the phone settings;
Open the USB modem settings window and set it to the "Enabled" mode, as shown in the figure;

After turning on the modem mode on your smartphone, the computer will automatically start installing the necessary driver software. Several dialog boxes will appear during the driver installation process.
The user needs to mark the permission for subsequent connections to the modem, as well as specify the desired type of connection network);
After installing the driver, the PC will be connected to the network. The network connection icon will appear in the notification area of the operating system.

Note! Computers with older versions of the operating system, such asWindowsXP/Vista may not automatically start installing the required drivers. Software, in this case, you need to download from the official website of the smartphone manufacturer.

To connect to the Internet faster, select the 3G connection technology in the mobile Internet settings of your smartphone.

Internet access from a computer through a regular cell phone

You can go online from a computer by connecting to it the most common cell phone.

There are several requirements for mobile:

it must support 3G, GPRS or EDGE connection technology,
the presence of a phone driver installed on the PC,
SIM card with configured internet and funds in the account,
You also need a USB cable to connect your cell phone to your PC.

Follow the instructions to learn how to connect the Internet on a computer via mobile:

Install the modem driver on the personal computer. You can download it from the website of the manufacturer of the mobile device;
After installing the driver, you need to initialize the modem. To do this, connect the mobile to the PC and open the device manager;

In the tab with modems, select a cell phone, right-click on it and open the properties tab, then find the field for additional initialization parameters and enter the following line in this field: AT + CGDCONT = 1, "IP", "active". Click OK;

Now you need to create a connection. Open the network and sharing management window and choose to create a new network, as shown in the figure below;

Specify the dial-up number in the window that opens (usually *9**#, the number must be checked with the mobile operator);
Enter the information that you received from the operator in the window shown in the screenshot below and click the Create button.

Sometimes the user is faced with the task of distributing the Internet from his computer to a mobile device, a tablet or smartphone based on the Android OS. What is so difficult about this? - you will probably ask a question, you just need to connect to a Wi-Fi wireless network and that's it. And if there is no wifi router itself, and this must be done via a USB cable. Here at such task also there are difficulties, but it is quite solvable.

How to connect Android to the Internet through a computer using a USB cable

If there is no wifi router nearby, and the speed of EDGE or 3G is not satisfactory, then you just need to connect Android to the computer, and so let's get started.
What we need for this:

1. Computer with high-speed Internet and Windows OS;

2. Android device (smartphone or tablet);

3. USB connection cable;

4. A special Android Debug Bridge program (highly desirable).

How to distribute the Internet from a computer to Android

Before starting the whole procedure, you need to activate an additional option in your Windows network settings, for this you need to go to network connections and check the box "Allow other network users to use this computer's Internet connection".

1. Download and unzip, it is the link between the Android device and the PC;

2. Activate the mode on Android, as we wrote earlier;

3. Connect your smartphone or tablet via USB cable to PC;

4. In the folder where you unzipped the program, find and open the AndroidTool.exe file;

5. In the window that appears, click "Refresh" (1), then from the Select DNS to use list (2), select DNS and click the Connect button (3).

6. You will see a window with a scrolling connection line (see the picture on the right);

7. If Everything went right, you will see an inscription in the “Connection Done” window, and the PC will distribute the Internet to an Android smartphone or tablet;

8. Sometimes a window may appear on a smartphone or tablet asking you to provide rights for the user, click "Allow".

That's all, now your computer distributes the Internet to Android via USB, you can safely use it.

All modern mobile devices are equipped with various modules that allow you to use them to access the Internet. However, you can not only surf the net on your phone, but also make your mobile phone a source of Internet for other devices.

Smartphone use

If you have a smartphone running on the Android OS, then the question of how to connect the Internet through the phone will have two solutions at once. Both methods described below are equally effective and are suitable not only for smartphones, but also for tablets with SIM card support.

If the computer (laptop) is equipped with a Wi-Fi module, you can make an access point from your smartphone that will distribute a wireless network.

After a message appears stating that the hotspot is active, click on it to open the settings. Select the "Access point settings" section.

Specify the network name, security method, and password. This data is set by default, but you can change it manually. Be sure to save your changes.

Connection to the access point created on the smartphone is carried out according to the standard scheme. Start a search for available networks on your computer, find your Wi-Fi point and connect.

If the computer does not have a Wi-Fi module, you can try using your smartphone as a USB modem:

If the connection is successful, a notification will appear in the system tray stating that the connection has been established.

If you are trying to set up the Internet on a computer that is running Windows XP or an earlier version of Microsoft's operating system, then most likely the modem driver will not install automatically. You will have to download it from the website of the smartphone manufacturer, force-install it, and only then try to access the Internet.

Mobile phone use

If you have a smartphone that supports the Hotspot function, then getting online will be easy enough. Another thing is if you want to connect to the Internet through a regular mobile phone. Before the advent of high-speed leased lines and wireless networks, this technology was used quite often, but recently it has been forgotten a little. Let's correct this oversight and revive useful information in memory.

The initialization line is individual for each individual tariff plan of a particular cellular operator. You can clarify these data necessary for a correct connection on the operator's website or in the technical support service.

Create a connection

After setting up your mobile phone, you can proceed to create a new connection. If you know how to set up the Internet on Windows 7/8/8.1, then you can easily cope with this task:

In a similar way, you can configure the Megafon modem if, for some reason, the standard program for connecting to the Internet refuses to work correctly.

If you are using Windows XP, then the names of the items and the order of creating a connection may be slightly different. However, the procedure itself remains unchanged, so it is important to understand its meaning.

For convenience, you can put a connection shortcut on your desktop. To do this, find the created connection, right-click on it and select "Create Shortcut". A window will appear asking you to place a shortcut on the desktop - click "Yes" to complete this operation.

Internet access

The equipment is set up, the connection is created - now you can access the Internet using your mobile phone:

Wait for the connection process to finish. If everything goes well, a notification will appear in the system tray that the connection has been established. Open any browser and check if the web pages are loading.